iBiotec AIRLINE AL 110
COMPRESSED AIR LUBRICANT
DESCRIPTION
-
Lubricant for compressed air circuit distribution systems and displacement pumps
-
Lubricant for pneumatic tools
-
Oiling after checking of the blocks of diving
-
Totally odorless
-
Non possible smell diffusion
-
Improves efficiency
-
Prevents equipment from seizing and sticking
-
Suitable viscosity
-
No risk of oil misting and fogging
-
AIRLINE AL 110 is also used for oiling diving valve blocks after regulatory testing
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
| PROPERTIES | STANDARD or METHOD | VALUE | UNITS | |
| Appearance | visual | Fluid | nm | |
| Colour | Visual | Colourless | nm | |
| Scent | Olfactory | No scent | nm | |
| Density at 20°C | NF EN ISO 12.185 | 845 | g/l | |
| Nature of solid lubricants | – | Without | – | |
| Nature of base oil | – | Mineral | – | |
| Kinematic Viscosity
Base oil at 40°C Base oil at 100°C |
NF EN ISO 3,104 |
23 18 |
mm2/s-1 mm2/s-1 |
|
| Sulphated ash | NF T 60.144 | 0 | % | |
| Acid index (ai) | EN 14,104 | <0.1 | mg(KOH)/g | |
| Closed-cup flash point | NF EN 22.719 | 200 | °C | |
| Self-combustion point | ASTM E 659 | >250 | °C | |
| Freezing point | ISO 3016 | -12 | °C | |
| Impurities
> 25 µ > 75 µ > 125 µ |
FMTS 791 3005 |
0 0 0 |
number/ml number/ml number/ml |
|
| PERFORMANCE PROPERTIES | ||||
| PROPERTIES | STANDARD or METHOD | VALUE | UNITS | |
| Utilisation temperature range | – | -10 +50 | °C | |
| Copper blade corrosion 24h 100°C | ISO 2160 | 1a | value | |
| Loss by evaporation 22h at 121°C | ASTM D 972 | <2 | % mass | |
| SHELL 4-ball test
Impression diameter Weld load index |
ISO 20.623 – ASTM D 2266 |
nm nm |
mm
daN |
|
| SRV test | ASTM D 5707 | nm | coefficient | |
| Elastomer swelling test
(dimensional change) |
FTM 791 | < 0.005 | % | |
| Suppression of operating noise | FAG MMG 11 | 2 | category | |
| Maximum permitted speed | – | nm | m/s-1 | |
| Water wash-off resistance at 80°C | ASTM 1264 | -16 | % | |
| Cold starting torque at -20°C | ASTM D 1478-63 | 18 | N.cm | |
PRESENTATION
| Manufacturing, lubrification, cleansing, protection, IBiotec® Tec Industries® Service offers a wide range of products reserved for industrial area |
| If you wish for : a free sample a technical advice a product data sheet a safety data sheet - Please contact us - |
| IBiotec® Tec Industries®Service manufacturer of technical chemical products, Welcome to our website. |
IBiotec® Tec Industries®Service is on :  |